plumbing help
plumbing help
got a toilette that won't quit running.....it's NOT the flap thing, it's been replaced and the seal is tight....
the water is actually running (from the pipe presumably), and coming out of the lil tube.........hard to explain but i figure someone on here knows what i'm getting at.....
can i do anything, or do i just need to replace the entire apparatus in there?
gator
the water is actually running (from the pipe presumably), and coming out of the lil tube.........hard to explain but i figure someone on here knows what i'm getting at.....
can i do anything, or do i just need to replace the entire apparatus in there?
gator
HRCH Eight Gauge - Gauge (see you on the bridge buddy)
HRCH Eight Gauge's Mountain Man - Trapper
HRCH Eight Gauge's Mountain Man - Trapper
-
- Regular
- Posts: 27
- Joined: Sun Jan 07, 2007 12:03 pm
- Location: t-town
- Contact:
had the same problem w/mine there is a foam gasket between the tank and the bowl. Drain your tank and take the two bolts loose and take the tank off. Get a new foam gasket. I don't know why but after so long they break the seal. Should take care off the problem when replaced. reminder: make sure it's the same size to big or to small will make alot of water on the floor!
- rjohnson
- Duck South Addict
- Posts: 4895
- Joined: Mon Jan 17, 2005 11:28 am
- Location: Brandon, MS
- Contact:
does it quit when you pick the float all the way up? if not you probably need a new float assembly, if so just adjust the screw on the float
http://www.lithicIT.com My biz
no, the FLOAT IS NOT THE ISSUE.
it's sliding up and down, when it gets to the top, the water is still coming out of the top of the "float apparatus", through a little rubber tube, into the plastic "pipe" leading to the bowl ---- and it never stops
gator
it's sliding up and down, when it gets to the top, the water is still coming out of the top of the "float apparatus", through a little rubber tube, into the plastic "pipe" leading to the bowl ---- and it never stops
gator
HRCH Eight Gauge - Gauge (see you on the bridge buddy)
HRCH Eight Gauge's Mountain Man - Trapper
HRCH Eight Gauge's Mountain Man - Trapper
Gator,
Get you one of those pressure switches, it replaces all the float assembly. Very easily installs and about half the cost of having to buy all new assembly. Its about the size of the float ball by itself.
Get you one of those pressure switches, it replaces all the float assembly. Very easily installs and about half the cost of having to buy all new assembly. Its about the size of the float ball by itself.
"Whoever said the pen is mightier than the sword obviously never encountered automatic weapons."
- General Macarthur

- General Macarthur

- rjohnson
- Duck South Addict
- Posts: 4895
- Joined: Mon Jan 17, 2005 11:28 am
- Location: Brandon, MS
- Contact:
gator wrote:no, the FLOAT IS NOT THE ISSUE.
it's sliding up and down, when it gets to the top, the water is still coming out of the top of the "float apparatus", through a little rubber tube, into the plastic "pipe" leading to the bowl ---- and it never stops
gator
means your float is not cutting off the flow, just buy a whole new toilet, you got the money, plus after your gator your pants story i'm sure it's had a rough life and needs to be retired anyway
http://www.lithicIT.com My biz
Who is online
Users browsing this forum: Bing [Bot] and 13 guests