DuckSouth.com

Gold Tip XT Hunter 5575 shaft @ 29", shaft weight 237.8 grains, fitted with 100 gr. Thunderhead, GT nock, and 3 4" gateway feathers, total weight roughly 372 grains

Hoyt Striker, @ 67lbs , shooting 297 fps

1" drop @ 30 yards, 2.5" @ 40, 4.5" @ 50

165 grain nosler ballistic tip on my .308 sniper rifle. I feel comfortable to about 500 yards.

hey chad, do you know the ballistics for the lever revolution 45-70 out to 200 yards?

i hand load and in my 300 WSM i shoot a 180 grain accubond w/ 69gr. of reloader 22. Im zero @ 100 yds. and 3 moa at 300

mottlet wrote:100 grain corelock in 6mm. Never shot it at anything further than 180. Since my father took it to Wyoming for his antelope hunt, it's now dead-on at 200. Might have to try some longer shots this year.

+1.4 at 100 -6.4 at 300...

Just out of curiosity....what's a gun suppose to be doing at 50 yards if it's @ 1 to 1 1/2" high at 100??

RebelYelp wrote:Gold Tip XT Hunter 5575 shaft @ 29", shaft weight 237.8 grains, fitted with 100 gr. Thunderhead, GT nock, and 3 4" gateway feathers, total weight roughly 372 grains

Hoyt Striker, @ 67lbs , shooting 297 fps

1" drop @ 30 yards, 2.5" @ 40, 4.5" @ 50

I am assumming if I tried and measured this one at 100 and 300 yards it would be..

+27575 at 100 and Dirt at 300

LawDawg wrote:165 grain nosler ballistic tip on my .308 sniper rifle. I feel comfortable to about 500 yards.

hey chad, do you know the ballistics for the lever revolution 45-70 out to 200 yards?

Ok -

308 165 Grain +2.1 at 100 and - 8.8 at 300 at 500 you better aim high by about 51"

45-70 - leverlution +3.0 at 100, zero at 200 and -27.8 at 300..

Just an FYI All of these stats are Zeroed at 200 yards..

Dutch Dog wrote:Just out of curiosity....what's a gun suppose to be doing at 50 yards if it's @ 1 to 1 1/2" high at 100??

I don't have those numbers in front of me.. But bullets will start the rise at the muzzel and continue to rise out to about 50 - 75 yards before they start down.. I can't get to any ballistic sites here from work.. It's like YouTube..

300 WIN Mag 3in high at 100yds,back dead on at 350yds shooting hand load's ballistic tip.Try not to shoot much long range(over 300) but can if that's the case.

digger wrote:300 WIN Mag 3in high at 100yds,back dead on at 350yds shooting hand load's ballistic tip.Try not to shoot much long range(over 300) but can if that's the case.

Kingspointhunter wrote:i hand load and in my 300 WSM i shoot a 180 grain accubond w/ 69gr. of reloader 22. Im zero @ 100 yds. and 3 moa at 300

Are you really getting that much better performance out of hand loads.

Because every factory ammo I see is no where near that flat..

The flattest I see for 300 Win Mag is if your +3 at 100 you would be -4 at 300 and - 15 at 400 and the 300 WSM is very similar.. If your really getting that much flatter shooting bullets from Handloads that is amazing..

.308 shooting 150 gr core lokt

Dutch Dog wrote:.308 shooting 150 gr core lokt

About +1.8 and - 7.8....

If you want to reach out and touch em.. Use that 243...

cwinkler wrote:

digger wrote:300 WIN Mag 3in high at 100yds,back dead on at 350yds shooting hand load's ballistic tip.Try not to shoot much long range(over 300) but can if that's the case.

Kingspointhunter wrote:i hand load and in my 300 WSM i shoot a 180 grain accubond w/ 69gr. of reloader 22. Im zero @ 100 yds. and 3 moa at 300

Are you really getting that much better performance out of hand loads.

Because every factory ammo I see is no where near that flat..

The flattest I see for 300 Win Mag is if your +3 at 100 you would be -4 at 300 and - 15 at 400 and the 300 WSM is very similar.. If your really getting that much flatter shooting bullets from Handloads that is amazing..

I shot last week, and using my nightforce 22.5 x 56 scope, I am dead on at 100 yds. and at 300 yds, i am adjusting 12 clicks up. each click is .25 moa.

Yeah....I plan on doing just that this year. It's a neat little gun, I really like it a lot. I'll probably use it until I kill one, then I MIGHT get the ol .308 back out. 1st things 1st though...gotta let my daughter put one on the ground with it before I do.

Kingspointhunter wrote:

cwinkler wrote:

digger wrote:300 WIN Mag 3in high at 100yds,back dead on at 350yds shooting hand load's ballistic tip.Try not to shoot much long range(over 300) but can if that's the case.

Kingspointhunter wrote:i hand load and in my 300 WSM i shoot a 180 grain accubond w/ 69gr. of reloader 22. Im zero @ 100 yds. and 3 moa at 300

Are you really getting that much better performance out of hand loads.

Because every factory ammo I see is no where near that flat..

The flattest I see for 300 Win Mag is if your +3 at 100 you would be -4 at 300 and - 15 at 400 and the 300 WSM is very similar.. If your really getting that much flatter shooting bullets from Handloads that is amazing..

I shot last week, and using my nightforce 22.5 x 56 scope, I am dead on at 100 yds. and at 300 yds, i am adjusting 12 clicks up. each click is .25 moa.

Wow that is pretty impressive..